#ifndef BACKSTAGEI_H
#define BACKSTAGEI_H

#include "BackstageInterfaceForUi.h"
#include "param_manage.h"
#include "golib/golib.h"


class Backstage : public BackstageInterfaceForUi
{
public:
    Backstage(void* pParaMng, void* pObjs);
    virtual ~Backstage();
    
	int registerPerson(char *name, char *term, int nDataOrigin = 1);
	int startIdentyState(bool setfaceReco = true, bool setPeInput = true);
    int stopIdentyState(bool setfaceReco = true, bool setPeInput = true);

	//工程设置
	int verifyFactorySettingPwd(const char *pwd);//验证密码
	int recoveryFactorySetting();//恢复出厂设置
	
	//设备设置
	int getDeviceId(char *devId, int len);//获取设备id
	int getHardwareConfig(char *hardVer, int len);
	int getStorSpace(int &total, float &free);//获取存储空间
	int getAppVersion(char *appVer, int len);//获取应用版本号
	int getRegisterNum();//获取注册人员数
	int getAccessRecordNotUpload();//获取未上传通行记录
	int getAccessRecordQty();//获取通行记录条数
	int getVolume();//获取音量大小
	int setVolume(int vol);//设置音量大小
	int getLcdBrightness();//获取屏幕亮度
	int setLcdBrightness(int brightness);//设置屏幕亮度
	bool getFillLightSw();//获取智能补光开关
	int setFillLightSw(bool isOpen);//获取智能补光开关
	int getStandbyTime();//获取待机时间
	int setStandbyTime(int time);//设置待机时间
	int getCloseScreenTime();//获取关屏等待时间
	int setCloseScreenTime(int time);//获取关屏等待时间
	int getLanguage();//获取语言
	int setLanguage(int lang);//设置语言
	//网络设置
	int getIP(char *ip, int len, int& type);//获取IP
	int setIP(char *ip);//设置IP
	enIpMethod getIpMethod();//获取IP方法
	int setIpMethod(enIpMethod ipMethod);//设置IP方法
	int getSubnetMask(char *mask, int len);//获取子网掩码
	int setSubnetMask(char *mask);//设置子网掩码
	int getGateway(char *gateway, int len);//获取默认网关
	int setGateway(char *gateway);//设置默认网关
	int getDNS(char *dns, int len);//获取DNS
	int setDNS(char *dns);//设置DNS
	int getEthMac(char *mac, int len);//获取mac
	int getWifiMac(char *mac, int len);//获取wifi mac
	int getServerAddr(char *addr, int len);//获取服务器ip
	int setServerAddr(char *addr, bool byQrcode = false);//设置服务器ip
	int testServerIP(char *addr, float &time);//测试服务器ip,成功返回0，失败-1
	int getIotServerIP(char *ip, int len);//获取服务器ip
	int setIotServerIP(char *ip);//设置服务器ip
	int getIotPort();//获取端口号, 成功返回端口号，失败返回-1
	int setIotPort(int port);//设置端口号
	bool getIpShowSw();
	int setIpShowSw(bool sw);
    //蓝牙设置
    //if success, return 0, else return err num;
    int getBtSwitch(bool &isOpen);
    int getBtName(string &devName);
    int getBtPairedDev(list<BluetoothDev_t> &devList);
    int getBtAvailDev(list<BluetoothDev_t> &devList);
    int getBtAllInfo(BluetoothStat_t &bluetoothStat);

    int btScan(list<BluetoothDev_t> &devList);//这个接口不需要吧？现在是定时的去搜索？所以点击“可用设备"条目时，直接调用getBtAvailDev就可以了？
    int btSetSwitch(bool isOpen);
    int btSetName(const string &devName);
    int btPaire(const string &devId);
    int btDisPaire(const string &devId);
    int btConnect(const string &devId);
    int btDisConnect(const string &devId);
    int btRenameDev(const string &devId, const string &devName);

    bool getParamBluetoothEnable();//获取蓝牙的开关
    int setParamBluetoothEnable(bool sw);//设置蓝牙的开关
    std::string getParamBluetoothName();//获取蓝牙设备名称
    int setParamBluetoothName(std::string name);//设置蓝牙设备名称
	//门禁设置
	int getUnlockTime();//获取开锁时间
	int setUnlockTime(int time);//设置开锁时间
	int getUnlockDelay();//获取开锁延时
	int setUnlockDelay(int time);//设置开锁延时
	enUnlockSignal getUnlockSig();//获取开锁信号
	int setUnlockSig(enUnlockSignal value);//设置开锁信号
	enAssist getAssistIn();//获取辅助输入
	int setAssistIn(enAssist assist);//设置辅助输入	
	enAssist getAssistOut();//获取辅助输出
	int setAssistOut(enAssist assist);//设置辅助输出
	enWiegand getWiegandIn();//获取韦根输入
	int setWiegandIn(enWiegand wiegand);//设置韦根输入
	enWiegand getWiegandOut();//获取韦根输出
	int setWiegandOut(enWiegand wiegand);//设置韦根输出
	enBaudRate getBaudRate();//获取波特率
	int setBaudRate(enBaudRate baudRate);//设置波特率
	int getWarningSig();//获取报警信号
	int setWarningSig(int signal);//设置报警信号
	//交互提示
	enLogo getLogo();//获取logo
	int setLogo(enLogo logo);//设置logo
	int getCustomLogo(char *logo, int len);
	enLogo getLogoTime();//获取logo+time
	int setLogoTime(enLogo logo);//设置logo+time
	enLogo getBackground();//获取背景图
	int setBackground(enLogo logo);//设置背景图
	enRecogResult getSuccessResult(char *data, int len);//获取成功结果
	int setSuccessResult(enRecogResult result, char *data);//设置成功结果
	enRecogResult getFailResult(char *data, int len);//获取失败结果
	int setFailResult(enRecogResult result, char *data);//设置失败结果
	bool getPlayAudioSw();//获取语音播报开关
	int setPlayAudioSw(bool isOpen);//设置语音播报开关
	
	//人脸识别
	bool getIdentificationSw();//获取身份核验开关
    int setIdentificationSw(bool sw);//设置身份核验开关
	enSimilarityTh getSimilarityTh();//获取相似度阈值
	int setSimilarityTh(enSimilarityTh th);//设置相似度阈值
	int setCustomSimilarity(int sim);//设置自定义识别相似度
	int getCustomSimilarity();//获取自定义识别相似度
	bool getLivingBodySw();//获取活体开关
	int setLivingBodySw(bool isOpen);//设置活体开关	
	enLivingBodyTh getLivingBodyTh();//获取活体检测阈值
	int setLivingBodyTh(enLivingBodyTh th);//设置活体检测阈值	
	bool getLivingBodyFailSw();//获取活体失败图片留存开关
	int setLivingBodyFailSw(bool isOpen);//设置失败图片留存开关	
	int getVerifyInterval();//获取验证间隔时间
	int setVerifyInterval(int time);//设置验证间隔时间	
	enRecogDistance getRecogDistance();//获取识别距离
	int setRecogDistance(enRecogDistance distance);//设置识别距离
	enRecogAngle getRecogAngle();//获取识别角度
	int setRecogAngle(enRecogAngle angle);//设置识别角度
	int getMaxTraceNum();//获取人脸最大跟踪数
	int setMaxTraceNum(int num);//设置人脸最大跟踪数
	enFaceQuality getFaceQuality();//获取人脸质量阈值
	int setFaceQuality(enFaceQuality quality);//设置人脸质量阈值
    virtual bool getDynamicFeatureSw();//获取动态底库的开关
    virtual int setDynamicFeatureSw(bool sw);//设置动态底库的开关
	//系统设置
	bool getNtpServerSw();//获取NTP服务开关
	int setNtpServerSw(bool isOpen);//设置NTP服务开关
	int getNtpServerAddr(char *addr, int len);//获取NTP服务地址
	int setNtpServerAddr(char *addr);//设置NTP服务地址
	int testNtpServer(char *addr, float &time);//测试NTP服务,	成功返回0，失败-1
	int getNtpServerPort();//获取NTP端口，成功返回端口号，失败返回-1
	int setNtpServerPort(int port);//设置NTP服务端口
	int getNtpCheckInterval();
    int setNtpCheckInterval(int interval);
    int getNtpTimeZone(char *timeZone, int len);
    int setNtpTimeZone(char *timeZone);
	int setVerifyFactorySettingPwd(char *pwd);//设置工程密码
	int testHardware();//硬件检测
	int cleanData();//清除数据
	int devReboot();//重启设备

    int startCapture();//start capture on register	
	int deletePerson(long long personID);
	int queryPersonList(long long* pPersonIDBuff, int nBuffCount, long long startID, int& nRealPerson);
	unsigned queryPerson(const char* searchText);
    unsigned queryPerson(const char* searchText, int pageIndex, stQueryPersonInfo personRet[], int personRetSize);
    unsigned queryAccessRecord(const char* name, const char* time);
    unsigned queryAccessRecord(const char* name, const char* time, int pageIndex, stQueryAccRedInfo recordRet[], int recordRetSize);	
	int clearPeople();
	int getPersonListState(int &sum, unsigned long long &maxPersonID);

	int wakeUpFromScreenSaverOrScreenOff();

    virtual int delPerson(long long personId);
    virtual int modifyPerson(stQueryPersonInfo &personInfo);
    virtual int addPerson(stQueryPersonInfo &personInfo);
    virtual int snapFace(std::string &feature, std::string &savePath);

	bool getMaskCheckSwitch();
	int setMaskCheckSwitch(const bool sw);

	bool getNoMaskNoPassSwitch();
    int setNoMaskNoPassSwitch(const bool sw);

    bool getTemperatureCheckSwitch();
    int setTemperatureCheckSwitch(const bool sw);
	bool getNoTemperatureNoPassSwitch();
    int setNoTemperatureNoPassSwitch(const bool sw);

	float getLowTemperature();
    int setLowTemperature(const float temp);
    float getHighTemperature();
    int setHighTemperature(const float temp);

	bool getQRCodeSwitch();
	int setQRCodeSwitch(const bool sw);

    bool getDataEncryptSw();
    int setDataEncryptSw(bool sw);
    int setDateTime(const char *dateTime);
    bool getAutoRebootSw();
    int setAutoRebootSw(bool sw);
    int getAutoRebootTime(char* time, int len);
    int setAutoRebootTime(const char *time);
    int getAutoRebootInterval();
    int setAutoRebootInterval(int interval);
    int ntpTimeCorrect();
    int ntpTimeCorrectForDevTest(const std::string& ntpServerIp);

    int getNetWireCfg(stNetWire& wireCfg);
    int setNetWireCfg(const stNetWire& wireCfg);
    int setNetWireEnable(bool enable);

    int getNetWifiCfg(stNetWifi& wifiCfg);
    int setNetWifiCfg(const stNetWifi& wifiCfg);
    int setNetWifiEnable(bool enable);
    int getSsidList(stAccPoint accPointList[], int accPointListSize);
    int claerNetWifiCfg();

    int getNet4GCfg(stNet4G& n4gCfg);
    int setNet4GEnable(bool enable);
    int reboot4G();

    int getScreenSaverConfig(stScreensaverCfg& cfg);

	int sendPassword(const char *password);

	void resetDecisionCenterTimer();
	int pauseDataFlow();
    int resumeDataFlow();
	
	int candidateChoosedInPopupWindow(int index);

	bool isWiegandIoTestOk();
	bool isRelayAndGpioTestOk();
	bool isRs485TestOk();
	bool isReaderUnderScreenTestOk();
	bool isWifiTestOk();
	bool isRtcTestOk();
	bool isWireEthTestOk();
 	bool is4gTestOk();
	bool isSerial1TestOk();

	void screenTest();
	void speakerTest();
	void microphoneTest(bool record) final;
    void audioSwitchTest() final;
    void tpTest();
	void irCamTest();
	void irLedTest();
	void ageingTest(unsigned hours);	
	int getMacFromMes(const char* mesAddrAndProdNo, const char* pcbSeq, std::string& mac);
	bool isAgeing(std::string& hours);	
	int getKeyDataMac(std::string& mac);

	int getRecoUiAdConfig(stScreensaverCfg& cfg);
	int recoUiTypeSwitch(unsigned x, unsigned y, unsigned w, unsigned h);

	int getDevPwd(int& type, std::string& pwd);
	int setLocalDevPwd(const std::string& pwd);

	int getKeyDataHardware(std::string& hardware);
	int setKeyDataHardwareAndUpdataFunction(const std::string& hardware);

	int setSetupAlreadyFlag();
	int getParkInfo(std::string& info);
	int setParkInfo(const std::string& info);
	int getDevPosi(std::string& posi);
	int setDevPosi(const std::string& posi);

	int getRs485Cfg();
	int setRs485Cfg(int cfg);
	int getRs485Prot1Addr();
	int setRs485Prot1Addr(int addr);
	int getRs485Prot3Cfg(int& handCfg, int& feetCfg);
	int setRs485Prot3Cfg(int handCfg, int feetCfg);
	int getGPIOCfg();
	int setGPIOCfg(int cfg);
    int setReverseAccessSw(bool enabled) final;
    bool getReverseAccessSw() const final;
    int getIDFaceVerifySw();
	int setIDFaceVerifySw(bool sw);
	int getBtLockCfg(BtDoorLock& cfg);
	int setBtLockCfg(const BtDoorLock& cfg);
	int getBtLockRemainingBatPwr(const std::string& mac);
	bool getHealthCodeSw();
	int setHealthCodeSw(bool sw);
	bool getHealthCodeNoFaceRequired();
	int setHealthCodeNoFaceRequired(bool sw);
	bool getHealthCodeAllowStranger();
	int setHealthCodeAllowStranger(bool sw);
	int getHealthCodePassCfg(int& codeColorCfg, int& c19tCfg, int& tripCfg, int& abtCfg);
	int setHealthCodePassCfg(int codeColorCfg, int c19tCfg, int tripCfg, int abtCfg);

    std::string utfRawStrToEncodeStr(const std::string &str);

    std::string getUnderScreenNfcModuleId();	 
	std::string getExtendNfcModuleId();
	bool isIdModuleInfoUploaded();
	bool isDevSettingDisable();
	void setAntiDemolitionAvail(bool avail, bool upload);
	bool getAntiDemolitionSw();
	void setAntiDemolitionSw(bool sw);
	int getAntiDemolitionOutput();
	void setAntiDemolitionOutput(int output);
	int getGpio4Cfg();
	void setGpio4Cfg(int cfg);
	int getGpio5Cfg();
	void setGpio5Cfg(int cfg);
	int getDoorCloseOvertime();
	void setDoorCloseOvertime(int overtime);
	bool getDisableDevSettingSw();
	void setDisableDevSettingSw(bool sw);
	int getTicketCheckCountToday();
	int getTicketModePeopleCountType();

	int getCallDevList();//获取通话设备列表
	int queryCallDevList(const std::string& text, std::vector<stCallDev>& devList);//查询指定的通话设备
	int callDev(const std::string& devTag, int devType);//发起通话请求
	int callAbort();//放弃通话（拨通之前）
	int callHangUp();//挂断
	int callReject();//拒接
	int callAccept();//接听
	int callSetVideoStream(bool enable);//允许/禁用视频
    int openCallRemoteDoor() final;	// 被打入电话过程中,打开对面面板机控制的闸机

	void verifyAbort();
	bool getShowIdAndVerSw();
	int setShowIdAndVerSw(bool sw);
	int playAudio(enAudioIndex index);
	int userItemChoose(int index);
	
private:
    int udpSend(const string &sendData, string &recvData);

    int resetNetworkCfg();
	int udpLoopToSvr(const std::string &sendData);
    
private:
    ParamManage *m_paramMng = nullptr;
    GOBJ m_objs = nullptr;
};

#endif