FaceAccess/Readme.md
2024-07-09 10:41:51 +08:00

481 lines
11 KiB
Markdown
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

```shell
amixer sset 'Master' 50% # 设置音量
mount -o remount rw /system/ # 读写挂载
keydata get mac # 操作mac
keydata set mac 6C:5C:3D:B2:27:78
keydata set hardware HW00000011C3000R -f
MAC存储位置/data/.mac
ps -ef | egrep start-app.sh | grep -v grep | awk '{print $2}' | xargs kill -9 2 > /dev/null
ps -ef | egrep dk_uart_id_reader | grep -v grep | awk '{print $2}' | xargs kill -9 2 > /dev/null
killall start-app.sh && killall GateFace
killall dk_uart_id_reader
tail -f /sdcard/logs/b020.log
mount -o remount rw /system/ && mv /system/bin/start-app.sh /system/bin/start-app.sh.bak
mount -o remount rw /system/ && mv /system/bin/start-app.sh.bak /system/bin/start-app.sh
echo 1 > /dev/watchdog
dk_uart_id_reader
keydata set hardware HW00000011C3000U -f
keydata get hardware
/etc/init.d/S97_lunch_init
```
`script/start-app.sh`有个`write_mac()`函数生成`/data/.mac`文件。
## 隐藏页面参数设置
```
http://192.168.8.120/otherPage.php?cmd=get_other_page_params
http://192.168.8.120/otherPage.php?cmd=set_other_page_params&distanceType=1&distance=1&dynamicFeatSimTh=70&dynamicFeatImgQualityTh=90&fast_temp_sw=true&save_reg_img_sw=true&audio_out_enabled=true
```
```json
{
"cmd": "set_other_page_params",
"distanceType": 1,
"save_reg_img_sw": true,
"fast_temp_sw": true,
"dynamicFeatSimTh": 70,
"dynamicFeatImgQualityTh": 90,
"audio_out_enabled": true
}
{
"ret": 0,
"code": 200,
"message": "OK",
"data": {
"distanceType": 1,
"distance": 100,
"dynamicFeatSimTh": 70,
"dynamicFeatImgQualityTh": 90,
"fast_temp_sw": true,
"save_reg_img_sw": true,
"audio_out_enabled": true
}
}
```
## FacePass平台交互
### 连接不成功UI上图标不对
```c++
void statusbarUi::updatePlatformConnectionStatus(const int status)
{
QPixmap pm;
switch(status)
{
case UiInterfaceForBackstage::PLATFORM_CONNECTION_STATUS_DISCONNECTED:
pm.load(":/res/image/disconnect.png");
break;
case UiInterfaceForBackstage::PLATFORM_CONNECTION_STATUS_CONNECTED:
pm.load(":/res/image/display.png");
break;
case UiInterfaceForBackstage::PLATFORM_CONNECTION_STATUS_LOGGED:
pm.load(":/res/image/display.png");
break;
default:
break;
}
m_label_platform->setPixmap(pm.scaled(20, 20, Qt::KeepAspectRatio));
}
```
## 测试/开发帐号
设备业务服务器地址统一都为9002。
- FacePass开发地址http://172.16.7.16/
- 账号luocai
- 密码:.Luo19961030
- 管理员账号admin
- 管理员密码Reconova_123456
- 可视对讲阳江博物馆项目https://172.16.100.22/
- 账号admin
- 密码Reconova_123456
- FacePass测试地址http://172.16.7.36/
## 人脸识别函数调用
相关模块初始化:
```c++
GoThread::taskProc(); // 初始化摄像头
FaceGate::preLoad(); // 等待摄像头初始化完成
FaceGate::taskProc(); // 初始化算法
AntiSpoof4Rv1109::init();
AttrDetector4Rv1109::init()
DetectorImpl4Rv1109::init()
LandmarkDetectorRk::init()
```
```mermaid
classDiagram
RwRecoResult
GRecoID --|> GObject
GRecoID --* RecoIDInfo
detector
attr_detector
landmark_detector
anti_spoof
GTrackerMng *-- AntiSpoof
GTrackerMng *-- LandmarkDetector
GDetectorHeadAttr *-- AttrDetector
AntiSpoof4Rv1109 ..|> AntiSpoof
LandmarkDetectorRk ..|> LandmarkDetector
AttrDetector4Rv1109 ..|> AttrDetector
GObject <|-- GTrackerLock
GDetectorTracker *-- Detector
RecoAlgorithm *-- Detector
RecoAlgorithm *-- LandmarkDetector
ParamManage --* GoThread
UdpServer --* GoThread
GCamera --* GoThread
GDetectorTracker --* GoThread
GTrackerMng --* GoThread
GTrackerLock --* GoThread
GDetectorHeadAttr --* GoThread
GReco1vsN --* GoThread
GReco1vs1 --* GoThread
GRecoID --* GoThread
GPeInput --* GoThread
```
逻辑实现都在`src/workflow/output/decision_actuator/decision_actuator.h`
```mermaid
flowchart TB
A["ADMsg::showDisplayMsg()"]
B["View::showRecoSuccess()"]
C["GDecisionActuator::showRecoResult()"]
D["GDecisionCenter::maskProc()"]
D-->C-->B-->A
```
## 人证核验逻辑
```mermaid
flowchart TB
A-->B-->C-->D-->E-->F-->G
F-->H-->I-->J
A["UDPIDCardReader::detect()"]
B["IdReader::isNewCardAvailable()"]
C["IdReader::polling()"]
D["Peripheral::idPolling()"]
E["ReaderThread::taskProc()"]
F["ReaderThread::readerInputAvailNoti()"]
G["GPeInput::readerInputAvailCallback()"]
H["GPeInput::idReaderCallback()"]
I["GDecisionCenter::idCardReaded()"]
J["GDecisionCenter::_idCardProc()"]
```
recoUi::slotShowSceneResult()
recoUiRecognize::slotsDrawScanner()
mainUi::notifyFaceInfo()
`recoUi::slotTimer()`负责将结果页面切回待机页面
### 人证核验限制
```
http://192.168.8.127/deviceAction.php?mask_check_sw=false&no_mask_no_entry=true&mask_no_entry=false&temp_check_sw=true&temp_anomaly_no_entry=true&min=35&max=37.3&sw=false&temp_unit=0&temp_type=1&temp_audio_sw=false&temp_show_sw=true&sim_th=0&reco_distance_type=3&face_sw=true&reco_from=1&fast_access_sw=false&ic_card_sw=false&face_and_id_sw=true&yuejuma=false&succ_interval=3&fail_interval=1&helmet_sw=false&dynamic_feature=false&face_frame_sw=false&dev_local_pwd_type=1&dev_local_pwd=&health_code_sw=false&health_code_allow_stranger_sw=false&health_code_allow_access_color=1&health_code_allow_access_c19t=4&health_code_allow_access_trip=0&health_code_allow_access_abt=0&travel_card_sw=false&disable_face_sw=false&health_code_needed_tip_type=0&health_trip_fail_times=3&health_trip_need_id_sw=false&health_ui_display_time=3&access_condition=[0,1]&light_and_background=[1,1,0,0,2]&health_check_phone_num_sw=false&health_ok_display_time=3&health_white_list_free_sw=false&health_code_c19t_hours_limit=0&health_trip_show_tip_sw=false&disable_dev_setting_sw=false&temp_sensitivity=0.75&cmd=set_device&face_id_card_verify_rule={"age_limit":{"enabled":true,"precision":2,"range":[{"from":40,"to":60},{"from":30,"to":-1},{"from":-1,"to":70}]},"zone_limit":{"enabled":true,"range":["14512","78945","31103"]}}
```
## 第三方票务平台注册
```
GDecisionCenter::ReconfirmReq
RWProtocol::sendRequestOpenDoorReconfirm()
UdpParse::voucher_verify_result_proc()
RWProtocol::voucherVerifyProc()
## 读取到身份证之后
GDecisionCenter::idCardReaded()
GRecoID::onIDCard() 保存图标
ReaderInfo 保存了nv21的图像编码
GDecisionCenterm_idInfo 保存了nv21的图像编码
```
## 闸机
### 故障上报
| 功能列表 | 类别 | |
| -------------------- | ------ | -------------- |
| 闸机主机电机故障 | 故障类 | 0x21+100=133 |
| 闸机副机电机故障 | 故障类 | 0x22+100=134 |
| 闸机主机离合器故障 | 故障类 | 2003+100= 2103 |
| 闸机副机离合器故障 | 故障类 | 2004+100=2104 |
| 闸机持续开闸信号故障 | 故障类 | 0x5A+100=190 |
| 闸机红外故障 | 故障类 | 0x5B+100=191 |
| 闸机遇阻停机故障 | 故障类 | 0x0A+100=110 |
| 闸机自检失败故障 | 故障类 | 0x23+100=135 |
| 闸机固件升级失败 | 故障类 | 1001+100=1104 |
| 闸机消防告警 | 告警类 | 0x04+100=104 |
| 闸机门长久未关告警 | 告警类 | 0x5C+100=192 |
| 人员强闯告警 | 告警类 | 0x60+100=196 |
| 人员非法推杆告警 | 告警类 | 2001+100=2101 |
| 人员逆行告警 | 告警类 | 0x61+100=197 |
| 人员尾随告警 | 告警类 | 0x62+100=198 |
| 人员逗留告警 | 告警类 | 0x5F+100=195 |
### 通行记录
```protobuf
//index=593 设备上报人员通过闸机事件
message PersonAccessedReport{
Common base=1;
string alarmId=2; //消息id
int64 recordId=3; //记录id
string timestamp=4;//时间戳,格式:"yyyy-MM-dd HH:mm:ss" 举例 "2023-11-30 11:32:45"
int32 direction=5;//方向12
}
//index=594 平台应答人员通过闸机事件
message ReplyPersonAccessedReport {
Common base=1;
string alarmId=2; //消息id
int64 recordId=3; //记录id
}
```
参考人脸通行记录
```
createAccessRecord
setAccessRecordsUploadStaByRecordIdRang
deleteAccessRecordByRecordId
getAccessRecordsNumByUploadSta
GPeInput::rs485DataProc 处理闸机进出
createGateAccessRecord
# upload thread
bool checkIfSendAccessInfoData(long long curSysSec);
int pushAccessInfoListToSrv(long long curSysSec);
int uploadAccessInfo(long long curSysSec);
```
## netconfig网络管理
```mermaid
classDiagram
NetConfigThread --> NetConfig
NetConfig --> Linker
EthLinker ..|> Linker
WlanLinker ..|> Linker
SIMLinker ..|> Linker
```
wifi_connect 连接wifi耗时过长
## UI组织
```mermaid
---
title: FaceGate UI
---
classDiagram
View *-- Backstage
View *-- mainUi
mainUi ..|> UiInterfaceForBackstage
mainUi *-- SetupUi
mainUi *-- settingUi
mainUi *-- recoUi
recoUi *-- recoUiRecognize
recoUi *-- recoUiRecognizeTypeColor
recoUi *-- recoUiRecognizeTypeAd
recoUi *-- recoUiScreensaver
recoUi *-- recoUiPassword
recoUi *-- recoUiHealthCode
recoUi *-- recoUiSceneResult
class View {
viewInitBackstage();
viewCreateUi();
}
```
### SetupUi
仅当`/data/config/need_setup_wizard`文件存在时显示,流程完成时再删除此文件。
### settingUi
```mermaid
classDiagram
SettingUiPage --|> MyWidgetWithMainStyleColor
settingUiDevMngNetWifi --|> SettingUiPage
settingUiDevMngNetWifiAccPoint --|> SettingUiPage
SettingUiPage *-- QListWidget
myListWidget --|> QWidget
```
### recoUi
```mermaid
classDiagram
SceneMsgWidget --|> QWidget
MsgWidget --|> QWidget
recoUiSceneResult *-- SceneMsgWidget
recoUi *-- recoUiSceneResult
recoUiRecognize --|> PageAcceptMouseAndTouch
PageAcceptMouseAndTouch --|> WidgetWithBackstageInterface
recoUiRecognize *-- PersonWidget
recoUiRecognizeTypeBase *-- MsgWidget
recoUiRecognizeTypeBase --|> PageAcceptMouseAndTouch
recoUiRecognizeTypeColor --|> recoUiRecognizeTypeBase
recoUiRecognizeTypeAd --|> recoUiRecognizeTypeBase
```
```
recoUiRecognize::event() 点击拨号按钮
recoUiRecognizeTypeBase::event() 点击拨号按钮
recoUiCallDial(拨号页面) 是 recoUi 的成员
recoUiRecognize和 recoUiRecognizeTypeBase(recoUiRecognizeTypeColor、recoUiRecognizeTypeAd) 也是 recoUi 的成员
```
## 硬件、固件版本说明
硬件版本说明: http://wiki.reconova.cn/pages/viewpage.action?pageId=36798802
### B045 CI构建包存放地址
```
\\172.16.2.222\瑞为版本\Test\shop\B045
```
### 测试机信息记录
扫码枪:
```
/dev/hidraw0
```
万睿面板机
```json
// MAC 6C:5C:3D:B2:27:81
{
"mt": 98,
    "ct": "HWA0310722C1110W",
    "mac": "6C5C3DB22781",
    "id": "412d00003263",
    "key": "412d9f3500c79fb3",
    "sct": "b42f6f643aedaf00"
}
```
B045 V05带屏幕
```json
{"mt": 98,"ct": "HWA0310722C1110U","mac": "6C5C3DB229A0"}
keydata set hardware HWA0310722C1110W -f
```
B033 V05裸板
```json
// MAC 6C:5C:3D:B2:27:82
{
"mt": 98,
    "ct": "HW00000011C3000U",
    "mac": "6C5C3DB22782",
    "id": "6c5c3db22782",
    "key": "6d711a5543353b5a",
    "sct": "06b619feadfae838"
}
```
B026啪啪运动裸板
```json
// keydata set hardware HW00000011C3000R -f
// keydata set mac 6C:5C:3D:B2:27:83 -f
{
"mt": 98,
    "ct": "HW00000011C3000U",
    "mac": "6C5C3DB22783"
}
// 带屏幕
{
"mt": 98,
    "ct": "HWA0310511C1000R",
    "mac": "6C5C3DB22783"
}
```